3/32" Shank Typhoon Carbide Burs

Typhoon™ Carbide Burs are excellent for faster, smoother finishing and rapid reduction of acrylic, die stone, epoxy material, and gypsum. They do not clog up or dull like other carbide cutters, because the "structurally aligned" carbide points allow the cut material to clear.

The Foredom Electric Company introduces 3/32" HP Shank Typhoon™ Tungsten Carbide Burs.

Typhoon™ Carbide Burs are excellent for faster, smoother finishing and rapid reduction of acrylic, die stone, epoxy material, and gypsum. They do not clog up or dull like other carbide cutters, because the "structurally aligned" carbide points allow the cut material to clear.

Typhoon™ Sleeves, mounted on mandrels with rubber drums, replace sandpaper-type arbor bands and are available in several diameters, lengths, and in both coarse (red) and fine (blue) grits.

For additional information, call (203) 792-8622.

More in Burs, Polishers, and Laboratory