3/32" Shank Typhoon Carbide Burs

May 1, 2000
Typhoon™ Carbide Burs are excellent for faster, smoother finishing and rapid reduction of acrylic, die stone, epoxy material, and gypsum. They do not clog up or dull like other carbide cutters, because the "structurally aligned" carbide points allow the cut material to clear.

The Foredom Electric Company introduces 3/32" HP Shank Typhoon™ Tungsten Carbide Burs.

Typhoon™ Carbide Burs are excellent for faster, smoother finishing and rapid reduction of acrylic, die stone, epoxy material, and gypsum. They do not clog up or dull like other carbide cutters, because the "structurally aligned" carbide points allow the cut material to clear.

Typhoon™ Sleeves, mounted on mandrels with rubber drums, replace sandpaper-type arbor bands and are available in several diameters, lengths, and in both coarse (red) and fine (blue) grits.

For additional information, call (203) 792-8622.

Sponsored Recommendations

Clinical Study: OraCare Reduced Probing Depths 4450% Better than Brushing Alone

Good oral hygiene is essential to preserving gum health. In this study the improvements seen were statistically superior at reducing pocket depth than brushing alone (control ...

Clincial Study: OraCare Proven to Improve Gingival Health by 604% in just a 6 Week Period

A new clinical study reveals how OraCare showed improvement in the whole mouth as bleeding, plaque reduction, interproximal sites, and probing depths were all evaluated. All areas...

Chlorine Dioxide Efficacy Against Pathogens and How it Compares to Chlorhexidine

Explore our library of studies to learn about the historical application of chlorine dioxide, efficacy against pathogens, how it compares to chlorhexidine and more.

Enhancing Your Practice Growth with Chairside Milling

When practice growth and predictability matter...Get more output with less input discover chairside milling.